Box C-010, class 6.1

2020-02-10T09:00:27+00:00

[:es]

El embalaje diseñado por ADREXPLO consiste en un Embalaje Combinado, a partir de:

  • Embalaje Exterior, formada por una caja 4G tipo 0201
  • Envase Interior: Láminas de papel, cajitas de estuchería con Blister o Blister sueltos.

Medidas interiores: 785 x 585 x 714 mm

Peso bruto máximo: 50kg

Clases autorizadas: Sustancias de la clase 6.1

Normativa aplicable: ADR-RID, MDG, ATA-OACI

 [:en]

The packaging designed by ADREXPLO consists of Combined Packaging, of:

  • Outer Packaging, consisting of a 4G box type 0201
  • Inner Container: Paper sheets, case boxes with loose Blister or Blister.

Interior measurements: 785 x 585 x 714 mm

Maximum gross weight: 50kg

Authorised classes: Substances of class 6.1

Applicable regulations: ADR-RID, MDG, ATA-ICAO

 [:]

Biot-1 box, class 6.2

2020-02-04T18:30:58+00:00

[:es]

El embalaje diseñado por ADREXPLO consiste en:

Varios recipientes primarios (viales de vidrio, metal o plástico) sellados con un tapón de goma. Estos recipientes primarios son los que contendrán el material de diagnóstico o la materia infecciosa a transportar; por lo que van protegidos con suficiente material amortiguador.
  • Embalaje secundario de plástico y aislante térmico.
  • Material absorbente en cantidad suficiente para absorber la totalidad del contenido (está colocado entre el recipiente primario y el embalaje secundario).
  • Un acondicionador que rodea y protege el embalaje secundario.
  • Un embalaje exterior de cartón ondulado lo suficientemente resistente.

Medidas interiores: 175 x 175 x 220 mm

Peso bruto máximo: Ver tabla

Clases autorizadas: Sustancias de la clase 6.2 infecciosas

Normativa aplicable: ADR-RID, MDG, ATA-OACI

 [:en]

The packaging designed by ADREXPLO consists of:

Several primary containers (glass, metal or plastic vials) sealed with a rubber stopper. These primary containers are those that will contain the diagnostic material or infectious material to be transported; therefore they are protected with sufficient buffer material.
  • Secondary packaging is made of plastic and thermal insulation.
  • Absorbent material in sufficient quantity to absorb the entire contents (it is placed between the primary container and the secondary packaging).
  • A conditioner that surrounds and protects the secondary packaging.
  • An outer packaging of corrugated cardboard of sufficient strength.

Interior measurements: 175 x 175 x 220 mm

Maximum gross weight: See table

Authorised classes: Class 6.2 infectious substances

Applicable regulations: ADR-RID, MDG, ATA-ICAO

 [:]

4G approved packaging

2020-02-11T13:16:02+00:00

4G approved packaging 4G boxes are intended to contain packaging of substances that can cause damage to people or the environment. The specific containers they contain can be made of glass, plastic, metal or aluminium. + INFO We contact you PROTECTIONS/POSITIONERS It must include the UN code on the outside - which classifies the contents as hazardous - followed by the necessary distinctions as to type of goods, material of the container, needs of the container, degree of risk and orientation of [...]

4GV approved packaging

2021-06-28T15:14:55+00:00

4GV approved packaging 4GV boxes are authorised to contain any type of dangerous goods inside, except radioactive ones. Class 7 with any type of inner packaging for dangerous goods, as long as the maximum weight determined and the applicable regulations are met. + INFO We contact you PROTECTIONS/POSITIONERS This type of packaging contemplates the most dangerous scenarios, which may result in the need to oversize the packaging. They must be provided with absorbent substances inside, a type of packaging that will secure [...]

Approved Large Packaging

2020-02-10T09:02:06+00:00

Approved Large Packaging In Adrexplo we are a benchmark in approved packaging. We also work with the 50G Large Packaging type. + INFO We contact you PROTECTIONS/POSITIONERS This type of "Large Package" consists of an outer package containing objects or inner packages and which: (a) is designed for mechanical handling; (b) has a net mass of more than 400 kg or a capacity of more than 450 litres, but does not exceed 3 m3 in volume. [...]

Limited Quantities

2020-02-10T09:14:05+00:00

Limited Quantities Page Limited quantities are dangerous goods presented in smaller quantities that pose a reduced risk to people, animals or the environment. They do not need the approval and labelling system required for 4G boxes, however, they will be marked with a distinctive symbol. The goods that are packaged in a limited quantity must be contained in a similar package to the one you would need if you did not have limited quantity. + INFO We contact you PROTECTIONS/POSITIONERS Maximum gross [...]

Octavín

2020-01-02T13:05:22+00:00

Embalaje compuesto por un fondo, un cuerpo octogonal y una tapa.

El Octavín, es un es un contenedor para el transporte y almacenaje de líquidos o productos a granel, en polvo o sueltos. Es ideal para almacenar grandes cargas de peso o volúmenes. La forma octogonal de este embalaje le confiere de una gran resistencia al abombamiento del embalaje.

  Para más información
Go to Top